Search results for "numerical modelling"

Numerical and experimental study of liquid metal stirring by rotating permanent magnets

2018

In this work, we study liquid gallium stirring by rotating permanent magnets. We demonstrate possibility of easily creating different flow patterns by rotating permanent magnets, which can be industrially important for controlling heat and mass transfer processes in the system. Unlike the typical approach of simulating magnet rotation as a transient problem and time-averaging the Lorentz forces, we solve the magnet rotation as a harmonic (frequency domain) problem, which leads to forces equal to time-averaged ones and decreases the simulation time considerably. Numerical results are validated using qualitative flow structure results from the neutron radiography visualization of tracer parti…

Effect of the junction angle on turbulent flow at a hydraulic confluence

2018

Despite the existing knowledge concerning the hydrodynamic processes at river junctions, there is still a lack of information regarding the particular case of low width and discharge ratios, which are the typical conditions of mountain river confluences. Aiming at filling this gap, laboratory and numerical experiments were conducted, comparing the results with literature findings. Ten different confluences from 45 ∘ to 90 ∘ were simulated to study the effects of the junction angle on the flow structure, using a numerical code that solves the 3D Reynolds Averaged Navier-Stokes (RANS) equations with the k- ϵ turbulence closure model. The results showed that the higher the junction angle, the …

Design, modelling, and analysis of a large floating dock for spar floating wind turbine installation

2020

Installation of floating wind turbines at the offshore site is a challenging task. A significant part of the time efficiency and costs are related to the installation methods which are sensitive to weather conditions. This study investigates a large floating dock concept, which can be used to shield a floating wind turbine during installation of tower, nacelle, and rotor onto a spar foundation. In this paper, the concept is described in detail, and a design optimisation is carried out using simple design constraints. Hydrodynamic analysis and dynamic response analysis of the coupled system of the optimum dock and spar are conducted. Two spars of different sizes are considered, and the motio…

Benchmarking numerical models of brittle thrust wedges

2016

International audience; We report quantitative results from three brittle thrust wedge experiments, comparing numerical resultsdirectly with each other and with corresponding analogue results. We first test whether the participatingcodes reproduce predictions from analytical critical taper theory. Eleven codes pass the stable wedgetest, showing negligible internal deformation and maintaining the initial surface slope upon horizontaltranslation over a frictional interface. Eight codes participated in the unstable wedge test that examinesthe evolution of a wedge by thrust formation from a subcritical state to the critical taper geometry. Thecritical taper is recovered, but the models show two…

Tectono-stratigraphic modelling of the North Sicily continental margin (southern Tyrrhenian Sea).

2004

A two-dimensional numerical modelling that simulate the kinematic and thermal response of the lithosphere to thinning was used for the quantitative reconstruction of the late Neogene to Recent times tectonic and stratigraphic evolution of the North Sicily continental margin (southern Tyrrhenian Sea). The numerical study of the evolution of the North Sicily margin builds on the crustal image and kinematic interpretation of the margin obtained by Pepe et al. [Tectonics 19 (2000) 241] on the basis of seismic data and gravity modelling. Tectonic modeling indicate that different segments of the margin were undergoing different vertical movements, which are mainly expression of the rifting and th…

SEWER PRESSURIZATION MODELLING BY A RIGID-COLUMN METHOD

2008

Mathematical modelling of pressurization transient by a rigid-column method is studied based on previous laboratory testing. Of course, such a method is not able to simulate the experimental intense pressure oscillations; however, it is considerably simpler than other feasible methods and more easily implementable within drainage network models. Starting from this operative point of view, the paper aims at recognizing “what” and “how much” of the transient can be simulated by a rigid-column method. Actually, better results were obtained than it was expected. The model proves to be successful in simulation of the filling pipe stage as well as the stabilization stage of flow to the final stea…

Experimental campaign to assess numerical simulation of tool wear in orthogonal cutting

2007

A numerical study on the effect of the interface material model on the tensile behaviour of FRCM strips

2019

Fibre Reinforced Cementitious Matrix (FRCM) composites are becoming increasingly popular for strengthening masonry structures for which the compatibility of the inorganic matrix with the chemical and physical properties of the support makes it advantageous to adopt such systems. However, despite the large use of FRCMs for strengthening applications, the characterization and modelling of the mechanical response in tension of these systems is an open issue. In fact, the constitutive tensile law of the composite shows to be affected by different variables, such as the clamping system adopted during tensile test, the gauge length used for recording strains, the monitoring of the number of yarns…

Ability of software SWMM to simulate sewer smooth pressurization transient

2010

As a consequence of heavy rainfall events or network malfunctioning, filling of sewers (pressurization) and network overflowing may occur. Several models are commonly used to simulate floods in drainage networks and their results are usually thought to be reliable and robust. Actually, mathematical models based on the momentum equation appear to be more suitable in correctly simulating the pressurization moving jump but models based on the energy equation are much more popular because of their greater simplicity in comparison to the former ones. In this paper, on the basis of laboratory pipe tests, the ability of software SWMM (Storm Water Management Model, probably the most popular softwar…

Rock decay phenomena and collapse processes in the “Latomiae del Paradiso” in Syracuse (Sicily)

2014

The Latomiae (origin: Greek latomia, from laas, las stone plus –tomia tomy ) del Paradiso in Syracuse are Magna Graecia rock quarries, located in the coastal areas of Southern Italy and internationally renowned for their impressive environment. The few historical technical records do not help clarify the events that led to their current configuration since a series of instability phenomena occurred due to decay processes over time. Through a geotechnical back-analysis, this work highlights the failure phenomena, which may have led to the current configuration of the easterly side of the Latomiae del Paradiso. The back-analysis process was carried out by means of numerical modelling, support…